Airspray / HVLP Guns - Devilbiss

    Airspray / HVLP Guns - Graco

    Airspray / HVLP Guns - Star

    Airspray / HVLP Guns - Iwata

    Manual Dispense Guns

    Airless / Air Assisted Guns

    Manual Dispense Guns

    Airless / Air Assisted Guns

    Airless Gun Accessories

   Airspray / HVLP Guns - Devilbiss

   JGA Conventional Pressure Feed Gun
   (JGA558)

The DeVilbiss JGA is a manual high performance, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. An extensive range of air cap, fluid tip and needle combinations is available to enable the gun to be used with virtually all industrial or re-finish paints, coatings, lubricants, dyes, stains, varnishes, lacquers and adhesives.

    back to top

   JGA Conventional Suction Feed Gun
   (JGA627)

When the quantities of material being handled do not justify a remote supply, then suction feed provides the ideal uncomplicated solution. The cup capacity is a generous 1 ltr. sufficient for most re-finishing or small scale industrial applications. The JGA has long been regarded around the world as the spray operators first choice and it has earned an enviable reputation for quality, performance, durability and precision control.

    back to top

   GFG Conventional Gravity Feed
   (GFG607)

The DeVilbiss GFG is a manual, gravity feed, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. An extensive range of air cap, fluid tip and needle combinations is available to enable the gun to be used with virtually all industrial or re-finish paints, coatings, lubricants, dyes, stains, varnishes, lacquers and adhesives.

    back to top

   GTI Compliant Pressure Feed Gun
   (GTIP)

The GTI by DeVilbiss is the very latest in compliant gun technology. With reduced weight the GTI maintains the highest standards of finish quality while significantly reducing air and material consumption. A comprehensive range of air cap, fluid tip and needle set-ups are available to ensure first class finishes with the complete spectrum of paints and coatings.

    back to top

   GTI Compliant Suction Feed Gun
   (GTIS)

For small material quantities and/or touch up work the GTI is available with a 1 litre or 750ml cup.

    back to top

   GTI Compliant Gravity Feed Gun
   (GTIG)

For the industrial and automotive refinish industry the GTI combines the ultimate finish quality with DeVilbiss reliability. Self seal paint bags are now available to help maximise material usage and ensure against leaks and drips.

    back to top

   AGG Conventional Automatic Spray Gun
   (AGG510)

The DeVilbiss AGG is an automatic high performance, conventional air atomising gun suitable for most liquid spray finishing and surface coating applications. An extensive range of air cap, fluid tip and needle combinations is available to enable the gun to be used with virtually all industrial paints, coatings, foodstuffs, lubricants, dyes, stains, varnishes, lacquers and adhesives. The compact design of the AGG is ideal for fitment to reciprocating or rotary machines, fixed spray positions or programmable robots.

    back to top

   GTI-A Compliant Automatic Spray Gun
   (GTI-A)

The DeVilbiss compliant GTI-A is a high performance automatic spray gun suitable for most liquid spray finishing and surface coating applications. An extensive range of air cap, fluid tip and needle combinations is available to enable the gun to be used with virtually all paints, coatings, foodstuffs, lubricants, dyes, stains, varnishes, lacquers and adhesives. GTI-A provides immediate paint savings, reduces overspray and therefore booth maintenance without compromising finish quality.

    back to top

   AGF Compact Automatic Spray
   (AGF508)

The DeVilbiss AGF is a compact, air atomising spray gun developed specifically for use on automatic and semi-automatic machines which finish small parts and components in high volume. It is eminently suitable for complicated multi-gun configurations and its size enables it to be mounted at close quarters and/or in compact groups. The AGF is suitable for most liquid spray finishing and surface coating applications. The fluid tips and needles are manufactured in stainless steel and the gun can be used with virtually all industrial paints, coatings, lubricants, dyes, stains, varnishes, lacquers and sprayable adhesives.

    back to top

   Airspray / HVLP Guns - Graco

   Delta Air Spray Pressure Feed Gun 0.8mm
   (G239540)

Graco's new Delta Spray gun is available as an HVLP or air spray gun. The HVLP model meets today's strict environmental regulation requirements, while providing the superior finish quality of air spray. Delta spray offers lightweight, user-friendly metal gun with the durability users have learned to expect from Graco. To meet future application needs, this gun can be converted from air spray to HVLP. Both models are designed with fewer repair parts for a gun that's easy to clean, maintain and service.

    back to top

   Delta Air Spray Suction Feed Gun 1.4mm
   (G239546)

For smaller quantities of materials the suction feed gun is the ideal option. Available with either a 500ml or 1 ltr cup.

    back to top

   Delta Air Spray Gravity Feed Gun 1.4mm
   (G239555)

The gravity feed gun is ideal for automotive and small touch-up work or areas where a suction gun is too awkward to use. Available with either 250ml or 500ml cup.

    back to top

   Automatic Air Spray Gun 0.030 (0.762)
   (G241737)

Graco's new Automatic Delta Spray gun is available as an HVLP or air spray gun. The HVLP model meets today's strict environmental regulation requirements, while providing the superior finish quality of air spray. The compact, modular design of this gun makes it easy to install and service. To meet future application needs, this gun can be converted from air spray to HVLP.

    back to top

   Airspray / HVLP Guns - Star

   Conventional Spray Gun 1.5mm
   (S-770-1S)

The Star S-770 is a professional spray gun suited to larger jobs. Comes complete with air control valve and 1 ltr pot with drip free diaphragm.

    back to top

   Pressure Spray Gun 1.5mm
   (S-770-1P)

The Star S-770P is ideal for use with pressure pots, making it a very versatile gun. Suitable for most materials including primers, top coats, two packs, adhesives and heavy industrial coatings.

    back to top

   Gravity Spray Gun 1.4mm
   (S-106-1G)

The Star S-106 is a full size gravity spray gun suitable for all automotive finishes, spray putty, adhesives and furniture coatings. Comes complete with air control valve and 600ml gravity cup with screw-on lid and strainer.

    back to top

   Mini Gravity Spray Gun 1.0mm
   (S-106TG-3)

A mini gravity feed spray gun, ideal for small touch-up work. Comes complete with air-control valve and 130ml gravity cup with screw-on lid.

    back to top

   Touch-up Spray Gun
   (SJ-108)

The Star SJ-108 is a suction feed touch-up gun ideal for stencilling, repairs and spraying small parts. Comes complete with 250ml suction cup.

    back to top

   Airspray / HVLP Guns - Iwata

   Compact Pressure Feed Spray Gun 0.8mm (0.031)
   (W-100-082P)

Designed for the small to medium workpiece in all industries. The W-100 pressure feed guns are used on production lines, for doing small to medium sized items.

    back to top

   Compact Suction Feed Spray Gun 1.3mm (0.051)
   (W-100-134S)

Designed for the small to medium workpiece in all industries especially for automotive refinishing. The W-100 suction guns are suitable for spraying chairs, bedside tables and so on in the furniture industry and doing one to two panels, inside doors, engine bays and colour matching in the automotive refinish industry.

    back to top

   Compact Gravity Feed Spray Gun 1.3mm (0.051)
   (W-100-134G)

Designed for the small to medium workpiece in all industries, especially for automotive refinishing applications. The W-100 gravity guns are suitable for spraying chairs, bedside tables and so on in the furniture industry and doing one to two panels, inside doors, engine bays and colour matching in the automotive refinish industry.

    back to top

   Pressure Feed Spray Gun 0.8mm (0.031)
   (W-200-082P)

For industrial applications.
The W-200 heavy duty pressure feed spray gun is used in manufacturing on production lines. W-200 spray guns are ideal for spraying high quality finishes onto furniture, kitchens, white goods, marine and any industrial/manufacturing industries.

    back to top

   Suction Feed Spray Gun 1.5mm (0.059)
   (W-200-151S)

For general applications.
Designed to be used for the moderate to large workpiece in any industry. W-200 spray guns are ideal for spraying high quality finishes onto furniture, kitchens, white goods, marine and any industrial/manufacturing industries.

    back to top

   Centre Gravity Feed Spray Gun 1.2mm (0.047)
   (W-400-122G)

Designed especially for the automotive refinish industry, these guns are ideal for medium to large paint jobs, from two panels to all over respray on cars, trucks and buses.

    back to top

   Manual Dispense Guns

   Pistol Grip Flo-Gun
   (G207945)

The Flo-Gun is a robust, versatile gun designed for industrial and heavy-duty applications.
Suitable for applying high viscosity sealant or adhesive.
Maximum Working Pressure - 6000 psi (408 bar).

    back to top

   Ultra-Lite© 4000 Pistol Grip Flow Gun
   (G235627)

The Ultra-Lite© provides precise control of fluid flow of low to medium viscosity materials. Four finger trigger design reduces operator fatigue. Designed to be used with any low abrasive, moderate viscosity sealant or adhesive. A wide variety of nozzles, extensions and flow brushes are available. Maximum Working Pressure - 4000 psi (270 bar).

    back to top

   Ultra-Lite© 4000sd Pistol Grip Flow Gun
   (G237607)

The Ultra-Lite© 4000sd is an easy to use pistol-grip flow gun for precision dispensing of highly viscous materials including waterborne and solvent borne materials with abrasive fillers. A wide range of nozzles, extensions and flow brushes are available.
Maximum Working Pressure - 4000 psi (270 bar).

    back to top

   Ultra-Lite© In-Line Flow Gun
   (G240199)

The Ultra-Lite© is a light-weight, durable flo-gun for precise dispensing of most low viscosity sealants and adhesives. The Ultra-Lite© uses a high strength forged aluminium body that makes it the lightest gun in its class with its unique cantilever trigger design.
Maximum Working Pressure - 3400 psi (234 bar).

    back to top

   Airless / Air Assisted Guns

   Contractor FTX™ Gun
   (G243285)

Graco's Contractor FTX gun is a well-balanced, lightweight, full-trigger airless spray gun. It features easy access filter and built-in swivel for less operator fatigue. Comes complete with 515 RAC 5 switch tip and performance series dripless tip guard. Maximum working pressure 0-170 psi (248 bar).

    back to top

   Manual Dispense Guns

   Ultra-Lite© 6000 Pistol Grip Flow Gun
   (G235628)

Ultra-Lite© 6000 provides excellent fluid control of high viscosity sealants and adhesives. This premium flow gun is designed to be used with any high viscosity sealant or adhesive including rubber-based sealers, waterborne, silicone and solvent borne adhesives and materials. A wide range of nozzles, extensions and flow brushes are available.
Maximum Working Pressure - 6000 psi (408 bar).

    back to top

   Airless / Air Assisted Guns

   Silver Plus™ Gun
   (G243283)

Graco's Silver Plus gun is known for its durability, long life spraying performance and comfortable design. It's preferred by commercial, industrial and protective coating contractors. No needle adjustments are required while the needle itself is guaranteed for life against breakage. Comes complete with 517 RAC 5 switch tip and dripless tip guard. Maximum working pressure - 5000 psi (345 bar).

    back to top

   Model 510 Gun
   (G236995)

Graco's model 510 gun is ideal for high solids, mastics and protective coating materials. With the spring outside of the fluid path, the model 510 gun is low maintenance and easy to flush. Comes complete with heavy duty RAC tip guard and GHD-527 tip. Maximum working pressure - 7400 psi (510 bar).

    back to top

   Automatic Airless Spray Gun
   (G239786)

Graco's automatic airless spray gun is compact and lightweight, as well as easy to install. The gun has a block design with a separate spray head and mounting manifold, allowing all hose connections to be made on the manifold. The spray gun can be removed and service performed without removing any connections, thus minimising downtime. The manifold is retrofitable to your correct automatic gun, so changeover can be easily performed. This gun is ideal for wood finishing, metal finishing, leather finishing, and automotive underbody finishing. The airless automatic gun is designed for applications where reliability, production speed, ease of installation and service are important. Maximum working pressure - 4000 psi (280 bar).
An air-assisted model is also available.

    back to top

   Automatic Airless Spray Gun - Heavy Duty
   (G206513)

Graco's heavy-duty automatic airless gun is a versatile, robust gun particularly ideal for line-striping applications. Maximum working pressure - 3000 psi (210 bar).

    back to top

   Alpha™ Spray Gun
   (G243576)

Graco's new Alpha air-assisted spray gun is designed to meet customer needs to atomise materials up to 1500 psi, with improved ergonomics for spray gun operators. This air-assisted spray gun offers high transfer efficiencies at high production speeds. In addition, the fine spray particle qualities produce an ideal finish for the wood industry, with low overspray.

The Alpha gun features a comfortable curved handle design and light trigger pull. There is a fluid inlet filter, as well as an additional filter in smaller tip sizes included as standard in the gun. The Alpha gun is available with Graco's Reverse-A-Clean tip, air cap and housing for those difficult applications that require the benefits of air-assisted airless. Maximum working pressure - 1500 psi (105 bar).

    back to top

   Air Assisted Airless Gun
   (FX-4000S)

The FX-4000 is a versatile, well-balanced gun ideal for many trades and industries such as furniture, farm and construction and metal fabrication. The gun features tough aluminium construction for rugged working conditions and stainless steel fluid passages and fittings for compatability with solvent and water-based products. Built-in spring loaded trigger adjustment reduces operator fatigue at lower fluid pressures. Airlflow is controlled by the knob at the rear of the gun to change the spray pattern from fan to round. The small, quick action thumb lever at the top of the gun body allows the gun to be switched between airless and air-assisted airless spray operations. The gun also incorporates swivel connections on air and fluid to reduce operator fatigue and replaceable stainless steel filters in the fluid tube to minimise tip blockage. Maximum working pressure - 3625 psi (250 bar).

    back to top

   K90 Airless Gun
   (A109003)

The K90 is a lightweight, versatile gun for heavy duty applications. The spring is outside the fluid passage resulting in better performance and maintenance-free operation. The K90 features a filter in the handle. Maximum working pressure - 7140 psi (500 bar).

    back to top

   T45 Airless Gun
   (T079103)

The T45 is a well-balanced, lightweight, full-trigger gun for easy operation and less fatigue. Features a swivel on fluid inlet and pencil-type filter in the handle. Maximum working pressure - 3530 psi (240 bar).

    back to top

   Airless Gun Accessories

   In-Line Gun Filter
   (G210500)

Filters fluid before it enters the gun.
Helps reduce tip plugging; provides better finish quality.
Attaches to hose and connects to the gun inlet.
Contains one filter (equivalent to 50 mesh and 100 mesh screen).
Working pressure - 5000 psi (345, 34.5 MPa) max.
Fluid Inlet - 1/4" npsm(m)
-Fluid Outlet- 1/4" npsm(f)

    back to top

   Contractor Gun Filter Assemblies

For Contractor Gun and Contractor FTX Gun. Installs in gun handle to filter fluid entering gun.

• Options:

    back to top

   Wagner Gun Filters

• Options:

    back to top

   LX-80 Titan Gun Filters (2 per pack)

• Options:

    back to top

   High Pressure Straight Swivel - 3000 psi (210 bar, 21.0 MPa)
   (B204940)

Provides a swivelling joint between gun and hose for free gun movement.
Installs at gun inlet.
Leather packing.
Working Pressure - 3000 psi (210 bar, 21.0 Mpa) max.
Fluid Inlet - 1/4" npt(m).
Fluid Outlet - 1/4" npsm(f).

    back to top

   High Pressure Straight Swivel - 5800 psi (400 bar, 40.0 MPa)
   (G189018)

Provides a swivelling joint between gun and hose for free gun movement.
Installs at gun inlet.
Working Pressure - 5800 psi (400 bar, 40.0 Mpa) max.
Fluid Inlet - 1/4" npsm(m).
Fluid Outlet - 1/4" npsm(f).

    back to top

   Tip Extensions

Easily spray hard-to-reach or narrow areas such as soffits, high walls and ceilings.
Includes: HandTite Guard and 7/8" (22mm) gun nut (fits Graco or Titan guns)
For Wagner, ASM, Airlessco or other guns using 11/16" (17mm) gun nut, order adapter (B181085)
Working Pressure - 4050 psi (279 bar, 28.0 MPa) max.
Thread Size - 7/8" - 1/4 UNF(f)
Instruction Manual - 303-011
Unique fitting design and captive gasket allows quick attachment to airless gun or in-line valve.

• Options:

    back to top

   Pressure Roller Attachment

Connects to airless sprayer for pressure roller applications.
GeoSperse roller head evenly distributes paint across roller cover.
Provides consistent quality finish and eliminates heavy edges and uneven build often associated with competitors' pressure rollers.
Order Roller Cover and adapter G224-398 to connect to 7/8" (22mm) thread separately.
Working Pressure - 3000 psi (210 bar, 21.0 MPa) max.
Inlet Thread Size - 1/8" - 27npt(m).
Instruction Manual - 307-755

• Options:

    back to top

   Pressure Roller Accessory - Telescoping
   (G218625)

Connects to airless sprayer for pressure roller applications.
18" to 36" (46cm to 91cm) telescoping extension provides great job site versatility, includes 9" x 1/2" (229mm x 13mm) roller cover.
Graco's GeoSperse roller head evenly distributes paint across roller cover.
Provides consistent quality finish and eliminates heavy edges and uneven build often associated with competitors' pressure rollers.
Standard with 7/8" (22mm) gun nut (fits Graco or Titan guns).
For Wagner, ASM or other guns using 11/16" (17mm) gun nut, order with part No. B181085 Gun Adapter.
Working Pressure - 3000psi (210 bar, 21.0 MPa) max.
Inlet Thread - 7/8" 27 npt(f) to roller attachment.
Instruction Manual - 307-713.

    back to top

   Pressure Roller Covers

• Options:

    back to top

   RAC 5 SwitchTips (Black Handle)
   (G286XXX)

General spray tip for all common coatings.

Click here to view the G286XXX tip selection chart.

    back to top

   Fine Finish RAC 5 SwitchTips (Green Handle)
   (GFF5XXX)

Dual orifice spray tip provides superior atomization for spraying light viscosity coatings in fine finish applications.

Click here to view the GFF5XXX tip selection chart.

    back to top

   LineLaser © RAC 5 SwitchTips (Yellow Handle)
   (GLL5XXX)

Creates clean, laser-sharp lines with no fuzzy edges or thin spots.

Click here to view the GLL5XXX tip selection chart.

    back to top

   HandTite Tip Guards (7/8 22mm)

Use with all RAC tips (G221XXX, G286XXX, GLL5XXX & GFF5XXX).

• Options:

    back to top

   Heavy-Duty RAC Guards
   (G222674)

Use with Heavy-Duty RAC tips.
Patented aerodynamic design
Extra large tip guard for heavier coating materials.
For 7/8" (22mm) thread size.

    back to top

   Adjustable Self-Cleaning Tips

Controls fan widths from 2" - 22" without changing tips.
Un-clogs easily with the twist of the tip.
Wear parts made of Tungsten Carbide.
Available in 6 sizes for use with most materials.
Pressure rated at 3500 psi, 250 bar.

• Options:

    back to top

   Tip Gaskets
   (G166969)

Thin (25 per package: G223373)
For use with flat tips or accessory attachments.
Provides a seal between the gun and spray tip or other attachments.

    back to top

   Tip Brushes (Bulk Buy - Min 50)
   (B53-1101B)

Stiff bottle brush for cleaning tips and guns.

    back to top

   Tip Cleaning Needles
   (FF-TCN)

Fine tapered broach for cleaning blocked tips.
Packet of 12.

    back to top