Your Complete Solutions

Comprehensive spray, fluid handling, coating inspection & finishing equipment.

Authorised Service and Repairs

Service and repairs on all leading spray equipment brands

Free Expert Technical Advice

Get some technical advice from the experts

Pneumatic Transfer Pumps

(16 products)

Showing 11-15 of 16 results

  • Fast-Flo 1:1 Pump

    Fast-Flo 1:1 Pumps are designed to operate at air input pressures of up to 180 psi and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Both carbon steel and stainless steel models with various seal configurations allow a variety of non-corrosive materials to be pumped. Ball checks or flat check pump configurations are available to accommodate different viscosity materials. All pumps have an air control valve, an air line coupler, and threaded intake valves.
    Air-powered for high reliability and low cost.
    Quiet operation – less than 785dBA at 100 psi (700kPa, 7 bar) and 40 cycles per minute.
    Pump is fully groundable.
    Options available in stainless steel and carbon steel.
    Plate (flat) check options for lower viscosity fluids.

    200ltr drum length pump, carbon steel with Teflon packings.
    Same as above with leather/Teflon packings.
    200ltr drum length pump. Stainless steel with polyethelene packings.

    Stubby models available on request.
    Different pump packings available. Call one of our sales team for technical assistance on 1300 503 610

    Availability: instock

    Availability: instock

  • Graco 2:1 Pump- T1 & T2 Transfer Pumps

    Rely on Graco transfer pumps for increased output and longer life!

    Graco T1 & T2 pumps maintain performance in any environment, even with higher viscocity materials. Spend more time spraying and less time on maintenance with Graco 2:1 transfer pumps.

    Availability: instock

  • Glutton 400 Pump

    Leak-proof design for long lasting, low maintenance bellows.
    Chrome over stainless steel, SevereDuty™ wear parts.
    Reversible outlet manifold to simplify plumbing.
    Vertical ball checks with no springs for uniform ball wear improving their life.

    Graco’s Glutton® 400 is used frequently for pumping abrasive high solids coatings (50% or more) in circulating systems for both conventional and HVLP in-plant applications. It is also an ideal catalyst feed pump because the design is sealed internally.

    This unique divorced duplex plunger style pump is designed to handle more shear and heat sensitive materials. The single piston seal design on each fluid piston virtually eliminates build-up material and subsequent abrasion wear. These seals can wear up to .25 (0.063 cm) before losing efficiency, while ordinary pumps will fail with as little as 0.005 (0.012 cm) wear. The piston seals are self-adjusting for long life and less downtime, for reduced overall cost. Even run-dry conditions can occur without piston seal failure. The long life co-polymer bellows seal creates a leak-proof design for the life of the seal, unlike a traditional sealed piston pump design.

    Typical Fluids Handled
    High solids coating (50% or more)

    Model 220-663 is a CS Glutton pump with UHMWPE packings.

    Other options also available

    Availability: instock

    Availability: instock

  • Graco Supply Systems

    Bulk supply systems for sealants and adhesives!

    Proven Graco NXT, Check Mate and DuroFlo technologies plus new advanced features helps to minimize maintenance and streamline normal everyday operations. Industry-first controls give you immediate and important information at the touch of a button. Graco Supply Systems are built with high-quality parts for long life and realiability.

    For 20, 30 and 60 liter (5,7 and 16-gal) pail sizes. Provides the same proven technologies as the larger systems, but with small NXT Air Motors.

    .Graco L20c- A lightweight elevator ram on cart

    .Graco S20- For low-volume applications of medium to high-viscosity materials

    .Graco S20c- Same as the S20, but includes a cart

    .Graco D60- Provides higher down-force and 60-liter pail capacity

    Product Highlights

    Easy to service-a simple turnbuckle raises the air motor for easy pump serviceability

    NXT air motor gives you quieter operation, better performance and improved efficiency

    New Platen design minimizes leftover material and reduces waste. Easy drum replacement keeps production moving. long lasting easy to replace one-piece platen seals.

    Quick, easy drum changes with an integrated drum air blow off

    Relaible tandem control for automatic, electric crossover

    Availability: instock

    Availability: instock

  • Steel Drum Dolly


    205054- Painted steel drum dolly, with swivel wheels suitable for 5 gallon (20ltr) pails.

    204144- Painted steel drum dolly, with swivel wheels suitable for 10 and 16 gallon (38 and 60 ltr) containers.

    Availability: instock

    Availability: instock

Showing 11-15 of 16 results