The Sundstrom SR200 full face mask is intended for use wherever the same maximum safety and good breathing comfort are required as for which the half masks have become acknowledged. The SR200 is used with the same simple filter system and the same compressed air attachment as the half masks. It has two exhalation valves for minimum exhalation resistance, a faceblank of silicone and a quickly adjustable elastic strap head harness.
Part of the inhalation air is guided past the visor in order to prevent it from misting.
In addition, the mask has very low weight, approximately 450g.
Tested in accordance with EN 136;1998, it has a nominal protection factor of 2000.
Pre-filter in front of the main particle and gas filters. Sorts out coarse wet and dry perticles
Should always be used for particle, gas and combined filters. The pre-filter protects the main filter against premature clogging by large particles.
Particle filters 210/310 P3 protect against all types of particles (dust, smoke, mist, spray, asbestos, bacteria, viruses, etc). The large filter area (11 dm2) ensures extremely low breathing resistance (0.3 – 0.35 mbar at 30 1/min, compared to the value of <1.2 mbar at 30 1/min specified by the standard) and has a long useful life. The 210/310 should always be used in combination with pre-filter 221, which increases the useful life of the particle filter.
SR217 A1 Gas Filter
Used against vapour from organic substances whose boiling point exceeds +65 degrees.
Used against vapour from organic substances whose boiling point exceeds +65 degrees